FAQ for Bucketverb

Don't Forget //

Teaser 1 image

Check out: Mulligan

Hands-on plugin control for Pro Tools

Teaser 2 image

Check out: Bucketverb

Lo-fi BBD reverb

Teaser 3 image

Check out: Lowender

Bass For Your Face

What bucket brigade chip does Bucketverb emulate, and why is it special?

Bucketverb emulates an analog reverb circuit built around the Panasonic MN3011 bucket brigade (BBD) chip.

Most bucket brigade chips have a single output. An analog signal level is captured at the input, and at each clock step, that voltage is moved one "bucket" down the line of internal capacitors. After enough clock steps have passed, that voltage appears again at the output.

The MN3011, uniquely, features six outputs. These tap into the delay line at specially-spaced enharmonic intervals, so that no delay time is a multiple of any of the others. This keeps the multiple delay signals from "piling up" at any particular interval. Or, as Panasonic themselves described it, in their BBD Bucket Brigade Devices databook:

6 stages not in multiple proportion with each other so that a proper mixing of the six differently delayed output signals generates a highly effective reverberation.

To the best of our knowledge, Bucketverb is the first studio-quality reverb effect built around the MN3011 BBD chip. The ADA STD-1 stereo delay used it, but with a maximum delay time of 55ms it was limited to the “short and metallic” end of the reverb spectrum, and was generally better suited to flanging, slapback echo, and chorusing applications. In contrast, Bucketverb’s maximum delay time goes to 3x that delay length, allowing for a much more spacious reverb effect.


See all FAQs for Bucketverb